Created by Kaminoan armorsmiths for the clone troopers of the Galactic Republic, the Phase I armor consisted of twenty form-fitting plates of lightweight plastoid-alloy composite. Those plates were sealed to a black temperature control bodysuit via magnatomic gription panels. The bodysuit was also pressurized, offering temporary protection against the vacuum of space. Its design was reminiscent of the Mandalorian armor, including the helmet with a distinctive T-shaped visor. Despite its advantages, the Phase I armor proved uncomfortable for the troopers to fit in, which was due to the Kaminoans' unfamiliarity with human ergonomics.
We are pleased to present another amazing work from Hex3D.
This listing is for the Helmet only. Armor set listed separately. Please specify Phase 1 or Phase 2 helmet.
The armor is made with an strong 3D printed plastic resin and it's very comfortable to wear, durable and light. Accurate measurements are needed in order to make these pieces fit properly. As each part is made to order, they are sized to the measurements you provide. Price shown is for a RAW armor straight from the printer.
RAW: Straight from the printer, supports and flash will be removed,
US and International orders welcome. For US and International Orders please contact for an updated shipping cost.
*As with all 3D printed projects. Some small defects are to be expected. All defects will be small enough to remove in the prep stage before primer and paint is applied.
**Update as of March 15th 2021. We are now at approx a 6 month wait list for all larger painted commissions as well as large suit orders. Clones, and Troopers are the majority of current orders and take a considerable amount of time to size and create. 2021 started off with a lot of fully painted suit commissions. And with the large amount on going and in the queue we are going into a 6 month wait. So just be aware of the wait times.**
Created by Kaminoan armorsmiths for the clone troopers of the Galactic Republic, the Phase I armor consisted of twenty form-fitting plates of lightweight plastoid-alloy composite. Those plates were sealed to a black temperature control bodysuit via magnatomic gription panels. The bodysuit was also pressurized, offering temporary protection against the vacuum of space. Its design was reminiscent of the Mandalorian armor, including the helmet with a distinctive T-shaped visor. Despite its advantages, the Phase I armor proved uncomfortable for the troopers to fit in, which was due to the Kaminoans' unfamiliarity with human ergonomics.
We are pleased to present another amazing work from Hex3D.
This listing is for the Helmet only. Armor set listed separately. Please specify Phase 1 or Phase 2 helmet.
The armor is made with an strong 3D printed plastic resin and it's very comfortable to wear, durable and light. Accurate measurements are needed in order to make these pieces fit properly. As each part is made to order, they are sized to the measurements you provide. Price shown is for a RAW armor straight from the printer.
RAW: Straight from the printer, supports and flash will be removed,
US and International orders welcome. For US and International Orders please contact for an updated shipping cost.
*As with all 3D printed projects. Some small defects are to be expected. All defects will be small enough to remove in the prep stage before primer and paint is applied.
**Update as of March 15th 2021. We are now at approx a 6 month wait list for all larger painted commissions as well as large suit orders. Clones, and Troopers are the majority of current orders and take a considerable amount of time to size and create. 2021 started off with a lot of fully painted suit commissions. And with the large amount on going and in the queue we are going into a 6 month wait. So just be aware of the wait times.**
