Created by Kaminoan armorsmiths for the clone troopers of the Galactic Republic, the Phase I armor consisted of twenty form-fitting plates of lightweight plastoid-alloy composite. Those plates were sealed to a black temperature control bodysuit via magnatomic gription panels. The bodysuit was also pressurized, offering temporary protection against the vacuum of space. Its design was reminiscent of the Mandalorian armor, including the helmet with a distinctive T-shaped visor. Despite its advantages, the Phase I armor proved uncomfortable for the troopers to fit in, which was due to the Kaminoans' unfamiliarity with human ergonomics.
We are pleased to present another amazing work from Hex3D.
This armor set is now available with the choice two different chest styles. One that more closely matches the Clone Wars animated series and one that more closely resembles the Screen version. The choice is yours.
**PLEASE NOTE: Scaling over 20% of the original size will incur an additional cost. Please contact us for measurements to confirm. This armor set is supplied with some parts needing assembly. Overly large or difficult to print parts cannot be made in one piece and must be assembled. Instructions for such parts will be supplied.
The handling fee on this armor set is to help offset the true shipping cost that Etsy does not include for over sized parcels. The suit must be sent in multiple boxes because of its size. Please understand that if you are paying for the shipping of one parcel in the Etsy quoted shipping, not the extra packages***
Armor set only, helmet listed separately.
The armor is made with an strong 3D printed plastic resin and it's very comfortable to wear, durable and light. Accurate measurements are needed in order to make these pieces fit properly. As each part is made to order, they are sized to the measurements you provide. Price shown is for a RAW armor straight from the printer.
RAW: Straight from the printer, supports and flash will be removed,
Painted: Sanded, Primed, and painted in the a two stage process. This is available painted. Please contact me about painted commissions as all painted commissions will be handled through a Paypal invoice.
* RAW STRAIGHT FROM THE PRINTER. As with all 3D printed projects. Some small defects are to be expected. All defects will be small enough to remove in the prep stage before primer and paint is applied. *
International orders welcome. For US and International Orders please contact for an updated shipping cost.
****Due to a drastic increase is demand our current production time as of March 3rd 2022 is now at approx a 8-10 month wait for all larger painted commissions as well as large suit orders. Fully painted and completed armor suits will be a longer production time. then stated in the listings. So please be patient. All commissioned work will be completed for you. We are working hard to keep up with the current (and growing and never ending) demand, so please be patient. All orders will be filled as soon as possible and updates will be given to all those who are in the queue. Clones, and Troopers are the majority of current orders and take a considerable amount of time to size and create and paint. 2021 started off with a lot of fully painted suit commissions and has carried through into 2022. With the large amount on going and in the queue we are going into at least a 6 month wait for printed armor orders. So just be aware of the wait times.****
Created by Kaminoan armorsmiths for the clone troopers of the Galactic Republic, the Phase I armor consisted of twenty form-fitting plates of lightweight plastoid-alloy composite. Those plates were sealed to a black temperature control bodysuit via magnatomic gription panels. The bodysuit was also pressurized, offering temporary protection against the vacuum of space. Its design was reminiscent of the Mandalorian armor, including the helmet with a distinctive T-shaped visor. Despite its advantages, the Phase I armor proved uncomfortable for the troopers to fit in, which was due to the Kaminoans' unfamiliarity with human ergonomics.
We are pleased to present another amazing work from Hex3D.
This armor set is now available with the choice two different chest styles. One that more closely matches the Clone Wars animated series and one that more closely resembles the Screen version. The choice is yours.
**PLEASE NOTE: Scaling over 20% of the original size will incur an additional cost. Please contact us for measurements to confirm. This armor set is supplied with some parts needing assembly. Overly large or difficult to print parts cannot be made in one piece and must be assembled. Instructions for such parts will be supplied.
The handling fee on this armor set is to help offset the true shipping cost that Etsy does not include for over sized parcels. The suit must be sent in multiple boxes because of its size. Please understand that if you are paying for the shipping of one parcel in the Etsy quoted shipping, not the extra packages***
Armor set only, helmet listed separately.
The armor is made with an strong 3D printed plastic resin and it's very comfortable to wear, durable and light. Accurate measurements are needed in order to make these pieces fit properly. As each part is made to order, they are sized to the measurements you provide. Price shown is for a RAW armor straight from the printer.
RAW: Straight from the printer, supports and flash will be removed,
Painted: Sanded, Primed, and painted in the a two stage process. This is available painted. Please contact me about painted commissions as all painted commissions will be handled through a Paypal invoice.
* RAW STRAIGHT FROM THE PRINTER. As with all 3D printed projects. Some small defects are to be expected. All defects will be small enough to remove in the prep stage before primer and paint is applied. *
International orders welcome. For US and International Orders please contact for an updated shipping cost.
****Due to a drastic increase is demand our current production time as of March 3rd 2022 is now at approx a 8-10 month wait for all larger painted commissions as well as large suit orders. Fully painted and completed armor suits will be a longer production time. then stated in the listings. So please be patient. All commissioned work will be completed for you. We are working hard to keep up with the current (and growing and never ending) demand, so please be patient. All orders will be filled as soon as possible and updates will be given to all those who are in the queue. Clones, and Troopers are the majority of current orders and take a considerable amount of time to size and create and paint. 2021 started off with a lot of fully painted suit commissions and has carried through into 2022. With the large amount on going and in the queue we are going into at least a 6 month wait for printed armor orders. So just be aware of the wait times.****
