Darth Starkiller, formerly Galen Marek, was a Human male Sith Lord who served under the Galactic Empire and Emperor Palpatine. He chose to strike down his former master, Darth Vader during his rescue of the future leaders of the Alliance to Restore the Republic. After a failed attempt to betray Palpatine as well, the Emperor brought the Rogue Shadow down onto him, crushing his body, resulting in his body reconstructed similar to Vader's. Stripped of a powerful apprentice, Starkiller was forced to serve as Palpatine's personal assassin until he could find a suitable replacement.
Now this iconic Trooper's armor can be yours, at least at the next Con. Made to order to your measurements. These armor sets are made to order.
The armor is made with an strong 3D printed plastic resin and it's very comfortable to wear, durable and light. Accurate measurements are needed in order to make these pieces fit properly. As each part is made to order, they are sized to the measurements you provide. Price shown is for a RAW armor straight from the printer. Helmet not included, available separately
**PLEASE NOTE: Scaling over 20% of the original size will incur an additional cost. Please contact us for measurements to confirm. This armor set is supplied with some parts needing assembly. Overly large or difficult to print parts cannot be made in one piece and must be assembled. Instructions for such parts will be supplied.***
RAW: Straight from the printer, supports and flash will be removed,
* RAW STRAIGHT FROM THE PRINTER. As with all 3D printed projects. Some small defects are to be expected. All defects will be small enough to remove in the prep stage before primer and paint is applied. *
International orders welcome. For US and International Orders please contact for an updated shipping cost.
****Due to a drastic increase is demand our current production time as of March 3rd 2023 is now at approx a 10-12 month wait for all larger painted commissions as well as large suit orders. Fully painted and completed armor suits will be a longer production time. then stated in the listings. So please be patient. All commissioned work will be completed for you. We are working hard to keep up with the current (and growing and never ending) demand, so please be patient. All orders will be filled as soon as possible and updates will be given to all those who are in the queue. Clones, and Troopers are the majority of current orders and take a considerable amount of time to size and create and paint. 2021 started off with a lot of fully painted suit commissions and has carried through into 2022 and 2023. With the large amount on going and in the queue we are going into at least a 6 month wait for some printed armor orders. So just be aware of the wait times.****
Darth Starkiller, formerly Galen Marek, was a Human male Sith Lord who served under the Galactic Empire and Emperor Palpatine. He chose to strike down his former master, Darth Vader during his rescue of the future leaders of the Alliance to Restore the Republic. After a failed attempt to betray Palpatine as well, the Emperor brought the Rogue Shadow down onto him, crushing his body, resulting in his body reconstructed similar to Vader's. Stripped of a powerful apprentice, Starkiller was forced to serve as Palpatine's personal assassin until he could find a suitable replacement.
Now this iconic Trooper's armor can be yours, at least at the next Con. Made to order to your measurements. These armor sets are made to order.
The armor is made with an strong 3D printed plastic resin and it's very comfortable to wear, durable and light. Accurate measurements are needed in order to make these pieces fit properly. As each part is made to order, they are sized to the measurements you provide. Price shown is for a RAW armor straight from the printer. Helmet not included, available separately
**PLEASE NOTE: Scaling over 20% of the original size will incur an additional cost. Please contact us for measurements to confirm. This armor set is supplied with some parts needing assembly. Overly large or difficult to print parts cannot be made in one piece and must be assembled. Instructions for such parts will be supplied.***
RAW: Straight from the printer, supports and flash will be removed,
* RAW STRAIGHT FROM THE PRINTER. As with all 3D printed projects. Some small defects are to be expected. All defects will be small enough to remove in the prep stage before primer and paint is applied. *
International orders welcome. For US and International Orders please contact for an updated shipping cost.
****Due to a drastic increase is demand our current production time as of March 3rd 2023 is now at approx a 10-12 month wait for all larger painted commissions as well as large suit orders. Fully painted and completed armor suits will be a longer production time. then stated in the listings. So please be patient. All commissioned work will be completed for you. We are working hard to keep up with the current (and growing and never ending) demand, so please be patient. All orders will be filled as soon as possible and updates will be given to all those who are in the queue. Clones, and Troopers are the majority of current orders and take a considerable amount of time to size and create and paint. 2021 started off with a lot of fully painted suit commissions and has carried through into 2022 and 2023. With the large amount on going and in the queue we are going into at least a 6 month wait for some printed armor orders. So just be aware of the wait times.****
